The Next Morning!
Now it's time to start
cleaning off the excess epoxy. The wooden
dowels placed to prevent the epoxy from filling the plate screw holes
came out without any problems. (I sprayed them with a mold release agent
before placing them into the holes!) A sharp chisel will
pop most of the excess epoxy off of the pinblock
area. Spraying the old portion of the pinblock with a mold release
agent helps also reduces the clean up time. Just
spray before cutting out the old part of the pinblock to prevent
getting the spray on the walls where the epoxy will have to hold.
Please send comments
via 
to Al Pebworth
BACK
*
This Page Last
Updated on Friday, June 19th, 1998