Area to be Transplanted Removed,
Transplant Partially Fitted
After the desired area
is removed, and I know that the side walls are straight, I put a
rough cut piece of "Delignit" under the pinblock, and use several
pinblock jacks to hold it in the desired position. Next I mark the top
of the insert, showing where it is to be cut. I use my bandsaw with
a 3/8 inch skip tooth blade to cut just inside of the line. Even when cut
with care, I usually find it necessary to sand some areas for the proper
fit. Note the sanding drum used for fitting.
Please send comments
via 
to Al Pebworth
BACK
*
This Page Last
Updated on Friday, June 19th, 1998